DT-3011J
NEMA 4X Stroboscope for Harsh, Wet Work Areas (110V AC-Powered)
Replacement for DT-311J
Replacement for DT-311J
Where powerful illumination and rugged speed measuring accuracy is required for the textile industry, the DT-3011J will perform where other stroboscopes will not. The DT-3011J is used to set injection timing, injection pressure, the timing of shedding and weft running time of weaving machinery.
Units combine rugged NEMA 4X (IP65) housing with high-performance accuracy, special phase shifting, with shock-absorbing components and top-mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.
Powered from 110V AC only
- Accepts external trigger input for synchronizing the flash rate
- Rugged NEMA 4X (IP65) housing
- Water & Dustproof housing (IP65)Phase “SHIFT”: Single touch in external operation: changes flash timing, 0-359 degrees
| Flash Range | 200-2,500 FPM |
| Phase Shift | 0° – 359° / 1° increments |
| Accuracy | ±0.02 % of reading |
| Flash Duration | 20 μs |
| Input Signal | High level: 5-24 V pulse Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω |
| Input Impedance | 47k |
| Flashtube | Xenon, 15 W max. (100 million flashes lifespan) |
| Power Requirements | 115 VAC |
| Operating Temp | 32 to 104 °F (0 to 40 °C) |
| Dimensions | 8.4" L x 5.7" W x 5.7" H (213 mm x 145 mm x 144 mm) |
| Weight | 4 lb (1.9 Kg) |
| Warranty | 2 years |
| Included Accessories | Handle, rubber strobe guard, cable |
 | PDF Instruction Manual Click to download |
