When measuring RPM in the non-contact measuring mode, the PLT-5000 emits a precision laser beam that is aimed at a small piece of reflective tape, which is affixed to the rotating target.
The PLT-5000 is extremely easy to operate and quickly converts from non-contact operation to contact operation by screwing the contact adapter in place. In addition to RPM's, a wide variety of engineering units for surface speed and length are user-selected via the front panel buttons. Units include; feet per minute, meters/min, yards per minute, inches per minute and more.
A built-in memory stores up to 10 measurements plus minimum, maximum, average and last.
Same as Shimpo part # PH-200L, however the version sold is labeled as the Check-Line PLT-5000, internally they are identical.
- Supplied with NIST-traceable calibration certificate
- Sharp Visible Laser Beam
- 60" Range
- Measures RPM & surface speed and length
- Stores 14 readings for recall
- Displays Metric & English lenght units
- 1 Year Warranty
- Simple One Button Operation
| The PLT-5000 comes as a complete kit with storage case, 6" circumference wheel, Funnel Adapter, Cone Adapter, Contact Adapter, three (3) AA Batteries, reflective tape, NIST certificate and instruction manual. |
|
| Display | 5 digit 0.47" (12mm) height LCD |
| RPM Measuring Range | Non-Contact; 6.0 - 99,999 Contact, 6.0 - 20,000 (limited for safety reasons) |
| Surface speed 6" Wheel | (m/min) 1.0-3,810, (yards/min) 1.0-4,166.4 (inch/min) 36-99,999 ( feet/min) 3.0-12,499 |
| Length- ( Using 6" wheel) | (M) 0.2-99,999-(yards) 0.2-99,999 -(feet) 0.5-99,999 |
| Total RPM | 1-99,999 |
| Accuracy | Revolution 6.0-599.9 rpm ±1rpm, 600-99,999 rpm ±0.006% & ±0.5 digit |
| Surface speed, length | 0.4% and ±1 digit |
| Memory | 14 Reading are stored in memory and retained for five minutes ( Last, Max, Min, average, and 10 selectable measurements.) |
| Update time | One Second |
| Detection | Laser Diode |
| Auto Power Off | 5 Minutes |
| Batteries Included | 3 AA 1.5V |
| Low Battery Indicator | Flashing "LO BAT" in display |
| Over Range Indicator | Flashing "OVR" display |
| Operating Temperature | 32-110F (0-45C) |
| Case construction | ABS Resin |
| Dimensions | 4.55" L x 2.52" W x1.24"H (115.5 mm x 64 mm x 3.15 mm) Length with contact adaptor: 149 mm |
| Weight | .35 Lb. (160 g)" to "6 ounces (160 g), including batteries |
| Accessories | Storage Case, Cone Adapter, Funnel Adapter, Master Wheel ( 6") Contact adapter, three (3) AA Batteries, 25 reflective tapes, NIST Certificate, Instructions |
| Warranty | 1 Year |
 | Sample Calibration Certificate Click to download |  | PDF Instruction Manual Click to download |
| PDF Data Sheet Click to download |
