DT-5TG (DISCONTINUED)
REPLACED BY DT-501X
DT-5TG-0 Panel Tachometer Without module connectors
Accurately display RPM, surface speed, flow or production data scaled to any engineering units.
An additional mode displays the elapsed time required to travel a fixed distance at a pre-selected speed for baking and similar conveyor applications.
- User-set Hi and Lo limits
- Provides 12 V DC to power an external sensor
- Snap-in installation without tools, brackets or screws mounted into panel cutout 92x45 mm
- Set-up data is easily entered via front panel keys and is not lost during power failures
- Fully scalable to set value in desired engineering units
- Powered by 85 - 265VAC or optionally, 24V DC
- Highly accurate
- Self-testing ability
- User-set display update time, decimal points and scalable to any engineering units
- 2 Year Warranty
| Operating Mode: | Rate Measurement | Elapse Time Counter |
| Display Selections: | 0-9.9999 | 99.99 seconds |
| 0-99.999 | 99 minutes 59 seconds | |
| 0-999.99 | 99 hours 59 minutes | |
| 0-9,999.9 | ||
| 0-99,999 | ||
| Measuring Range: | 10-99,999 rpm (@ 1 pulse per rev.) | |
| 0.2-30,000 rpm (@ 60 pulses per rev.) | ||
| Display: | 5-digit LED, 0.56" (14.2 mm) high | |
| Accuracy: | ± 0.008% or ± 1 digit | |
| Number of PPR: | 1-9,999 pulses/rev (selectable) | |
| Input Signal Maximum Frequency: | Sine wave: 10kHz | |
| Square wave: 30kHz | ||
| Open Collector: 30kHz | ||
| Contact closure: 20Hz | ||
| Input Signal Amplitude: | Sine wave: 0.3-30 V P-P | |
| Square wave: LO: 0-1.5 V, HI: 4-30 V | ||
| Input Impedance: | 10 k-Ohms for magnetic pickup, rotary pulse generator and proximity switch | |
| Voltage Output | 12 V DC ±5% (50 mA max.) to power sensors | |
| Applicable Sensors: | Rotary pulse generator, magnetic pickup, proximity switch, retro-reflective optical | |
| Ambient Temperature: | 32º - 113º F (0-45º C) | |
| Power Consumption: | 1 W (5 W when optional modules are used) | |
| Voltage Requirement: |
DT-5TG: 85-265 V AC DT-5TG-0-DC: 9-35V DC (typically 24V DC) |
|
| Dimensions: | 3.46" L x 1.88" H x 3.78" D (8 L x 48 H x 96 D mm) includes bezel and fits 1/8 DIN cutout | |
| Weight: | 0.55 lbs. (250 g) | |
| Cutout Dimensions: | 92W X 45H (mm) | |
 | Instruction Manual Click to download |
